Welding

WELD 1110 Occupational Orientation and Safety
An introduction to the occupation of welding including facility layout, policies, safety and health procedures, information and practice concerning basic safety, safe operation of hand and power tools, materials handling and maintenance of a safe working environment. Students are also introduced to safe welding practices, communication skills, and essential workplace skills.
PREREQUISITES: Complete all appropriate entrance placement tests and campus registration requirements. Unless OSHA approved safety training documentation can be produced, credit should “NOT” be granted for this course. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content. (Workkeys assessment and training recommended)

Lecture Hours 2 Lab Hours 1 Total Credits 3 Clock Hours 60

WELD 1120 Basic Blueprint, Metallurgy and Weld Symbols
This course provides instruction and review of basic construction mathematics, weld symbol interpretation, reading welding detail drawings, basic metallurgy, metal identification, and heat treatment of metals.
PREREQUISITES: WELD1110 plus meets minimum approved Math entrance score, and consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 2 Lab Hours 1 Total Credits 3 Clock Hours 75

WELD 1130 Welding Inspection and Testing
An introduction to codes, standards, and agencies regulating the welding industry, a review of weld quality standards, concepts in proper visual and destructive testing methods, and a study of proper base metal preparation and joint fit-up.
PREREQUISITES: WELD1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 1140 Electrical Fundamentals
An introduction to welding equipment fundamentals of operation, polarity, equipment types, safety and systems setup; including welding related equipment connection and a review of tools used in welding procedures.
PREREQUISITES: WELD1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 45

WELD 1210 Oxyfuel Systems
An introduction to the principals of cutting with an Oxyfuel (OFC) apparatus, cylinder and equipment safety, proper handling and setup including practice cutting mild steel using both the manual and machine process.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 1310 Cutting Processes-CAC/ PAC
An introduction to the principals of safely operating Air Carbon Arc Cutting (CAC-A) and Plasma Arc Cutting (PAC) equipment including practice cutting and gouging ferrous and non-ferrous metals.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 45

WELD 1410 SMAW- Basic Beads
An introduction to the principals of Shielded Metal Arc Welding (SMAW), component and consumable identification including the safe setup of equipment and practice of welding stinger beads, weave beads, and overlapping beads in various positions using various electrodes.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 1411 SMAW- Fillet Weld
Safely setup and operate Shielded Metal Arc Welding (SMAW) equipment with practice of single and multi-pass fillet welds in the flat, horizontal, vertical, and overhead positions using various electrodes.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Horus 0 Lab Hours 3 Total Credits 3 Clock Hours 105

WELD 1412 SMAW- V-Groove BU/Gouge
Safely setup and operate Shielded Metal Arc Welding (SMAW) equipment with practice of V-Groove welds with a backing or back gouging in the flat, horizontal, vertical, and overhead positions using various electrodes.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 105

WELD 2110 FCAW- Basic Fillet Welds
An introduction to the principals of Flux Core Arc Welding (FCAW), component and consumable identification including the safe setup of equipment and practice of fillet welds in the flat, vertical, horizontal, and overhead positions.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 2 Total Credits 3 Clock Hours 105

WELD 2111 FCAW- Groove Welds
Safely setup and operate Flux Core Arc Welding (FCAW) equipment with practice of V-Groove welds with a backing or back gouging in the flat, horizontal, vertical, and overhead positions.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 105

WELD 2210 GTAW- Basic Multi-Joint
An introduction to the principals of Gas Tungsten Arc Welding (GTAW), component and consumable identification including the safe setup of equipment and practice of welding beads (fillet welds), and groove welds in the flat, vertical, horizontal, and overhead positions using carbon steel consumables.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 2 Total Credits 3 Clock Hours 105

WELD 2230 GTAW- Aluminum Multi- Joint
An introduction to the principals of Gas Tungsten Arc Welding Aluminum (GTAW-A), component and consumable identification including the safe setup of equipment and practice of welding fillet and groove welds in the flat, horizontal, vertical, and overhead positions.
PREREQUISITES: WELD1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 2 Total Credits 3 Clock Hours 105

WELD 2310 GMAW- Basic Fillet Weld
An introduction to the principals of Gas Metal Arc Welding (GMAW), types of weld transfer, weld quality, and component and consumable identification including the safe setup of equipment and practice of welding fillet welds in the flat, horizontal, vertical, and overhead positions.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 2 Total Credits 3 Clock Hours 105

WELD 2311 GMAW- Groove Weld
Safely setup and operate Gas Metal Arc Welding (GMAW) equipment with practice of open V-Groove welds in the flat, horizontal, vertical, and overhead positions.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 105

CPTR 1000 Introduction To Computers
An introductory study of computer system components, operating system environments.  Internet concepts, and security issues. Includes a hands-on study emphasizing computer hardware and various operating systems features.
PREREQUISITES: None

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 45

JOBS 2450 Job Seeking Skills
This course is required of all Technical Diploma and Associate Degree students and should be taken during their last semester of enrollment prior to completion of diploma/degree requirements. 

This course assists students in making immediate and future decisions concerning job choices and educational growth by compiling résumés, evaluating job offers, and outlining information essential to finding, applying for, and terminating a job. It also includes personal/career assessments including foundational Work Keys assessments, application for the Louisiana Work Ready! (National Career Ready) Certificate.

The completion of a student career presentation portfolio to minimum specifications will be a requirement for course completion.
PREREQUISITES: ORNT 1000

Lecture Hours 2 Lab Hours 0 Total Credits 2 Clock Hours 30

WELD 1420 SMAW- V-Groove Open
An introduction to the safe setup of equipment and principals of Shielded Metal Arc Welding (SMAW) for open V-Groove welds, joint preparation, proper weld quality, qualification testing, and practice welding open V-Groove welds in the flat, horizontal, vertical, and overhead positions.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 1510 SMAW- Pipe 2G
An introduction to the safe setup of equipment and principals of Shielded Metal Arc Welding of Pipe (SMAW-Pipe) in the 2G vertical fixed position, joint preparation, proper weld quality, qualification testing, and practice welding Shielded Metal Arc Welding of Pipe (SMAW-Pipe) in the 2G vertical fixed position.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 1511 SMAW- Pipe 5G
Safely setup equipment and apply principals of Shielded Metal Arc Welding of Pipe (SMAW-Pipe) in the 5G horizontal fixed position, review joint preparation, review proper weld quality and qualification testing, and practice welding Shielded Metal Arc Welding of Pipe (SMAW-Pipe) in the 5G horizontal fixed position.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 1512 SMAW- Pipe 6G
Safely setup equipment and apply principals of Shielded Metal Arc Welding of Pipe (SMAW-Pipe) in the 6G - 45° fixed position, review joint preparation, review proper weld quality and qualification testing, and practice welding Shielded Metal Arc Welding of Pipe (SMAW-Pipe) in the 6G - 45° fixed position.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 1610 SMAW Stainless Steel (SMAW-SS) Multi- Joint
An introduction to the principals of Shielded Metal Arc Welding Stainless Steel (SMAW-SS), component and consumable identification including the safe setup of equipment and practice of groove welds in the flat, vertical, horizontal, and overhead positions using stainless steel consumables.
PREREQUISITES: Weld1110, WELD1420 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 1620 SMAW Stainless Steel (SMAW-SS) 5G Pipe
An introduction to the safe setup of equipment and principals of Shielded Metal Arc Welding of Stainless Steel Pipe (SMAW-SS Pipe) in the 5G horizontal fixed position, joint preparation, proper weld quality, qualification testing, and practice welding Shielded Metal Arc Welding of Stainless Steel Pipe (SMAW-SS Pipe) in the 5G horizontal fixed position.
PREREQUISITES: Weld1110, WELD1610, WELD1510, WELD1511, WELD1512, or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 1621 SMAW Stainless Steel (SMAW-SS) 2G Pipe
Safely setup equipment and apply principals of Shielded Metal Arc Welding of Stainless Steel Pipe (SMAW-SS Pipe) in the 2G vertical fixed position, review joint preparation, review proper weld quality and qualification testing, and practice welding Shielded Metal Arc Welding of Stainless Steel Pipe (SMAW-SS Pipe) in the 2G vertical fixed position.
PREREQUISITES: Weld1110, WELD1610, WELD1510, WELD1511, WELD1512 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 1622 SMAW Stainless Steel (SMAW-SS) 6G Pipe
Safely setup equipment and apply principals of Shielded Metal Arc Welding of Stainless Steel Pipe (SMAW-SS Pipe) in the 6G - 45° fixed position, review joint preparation, review proper weld quality and qualification testing, and practice welding Shielded Metal Arc Welding of Stainless Steel Pipe (SMAW-SS Pipe) in the 6G - 45° fixed position.
PREREQUISITES: Weld1110, WELD1610, WELD1510, WELD1511, WELD1512 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2112 FCAW Pipe 5G
Safely setup and operate Flux Core Arc Welding pipe (FCAW-Pipe) equipment, proper assembly of a 5G - horizontal fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 5G pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 2113 FCAW Pipe 2G
Safely setup and operate Flux Core Arc Welding pipe (FCAW-Pipe) equipment, proper assembly of a 2G – vertical fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 2G pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2114 FCAW Pipe 6G
Safely setup and operate Flux Core Arc Welding pipe (FCAW-Pipe) equipment, proper assembly of a 6G(R) - 45° fixed position pipe joint with/without a restriction ring, proper weld quality, safe setup of equipment and practice welding a 6G(R) pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2220 GTAW Pipe 5G
An introduction to the principals of Gas Tungsten Arc Welding of Pipe (GTAW-Pipe) in the 5G horizontal fixed position, proper assembly of a 5G pipe joint, proper weld quality, safe setup of equipment and practice welding a 5G horizontal fixed position pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab hours 3 Total Credits 4 Clock Hours 120

WELD 2221 GTAW Pipe 2G
Safely setup and operate Gas Tungsten Arc Welding Pipe (GTAW-Pipe) equipment, proper assembly of a 2G vertical fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 2G vertical fixed position pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2222 GTAW Pipe 6G
Safely setup and operate Gas Tungsten Arc Welding Pipe (GTAW-Pipe) equipment, proper assembly of a 6G - 45° fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 6G - 45° fixed position pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2240 GTAW Low Alloy (GTAW-LA) 5G Pipe
An introduction to the principals of Gas Tungsten Arc Welding of Low Alloy Pipe (GTAW- Low Alloy Pipe) in the 5G horizontal fixed position, proper assembly of a 5G pipe joint, proper weld quality, protecting the root, safe setup of equipment and practice welding a 5G horizontal fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2220, WELD2221, WELD2222 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 2241 GTAW Low Alloy (GTAW-LA) 2G Pipe
Safely setup and operate Gas Tungsten Arc Welding Low Alloy pipe (GTAW- Low Alloy Pipe) equipment, proper assembly of a 2G vertical fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 2G vertical fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2240 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2242 GTAW Low Alloy (GTAW-LA) 6G Pipe
Safely setup and operate Gas Tungsten Arc Welding Low Alloy pipe (GTAW- Low Alloy Pipe) equipment, proper assembly of a 6G - 45° fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 6G - 45° fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2240 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2250 GTAW Stainless Steel (GTAW-SS) 5G Pipe
An introduction to the principals of Gas Tungsten Arc Welding of Stainless Steel Pipe (GTAW- Stainless Steel Pipe) in the 5G horizontal fixed position, proper assembly of a 5G pipe joint, proper weld quality, protecting the root, safe setup of equipment and practice welding a 5G horizontal fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2220, WELD2221, WELD2222 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 2251 GTAW Stainless Steel (GTAW-SS) 2G Pipe
Safely setup and operate Gas Tungsten Arc Welding Stainless Steel pipe (GTAW- Stainless Steel Pipe) equipment, proper assembly of a 2G vertical fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 2G vertical fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2250 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2252 GTAW Stainless Steel (GTAW-SS) 6G Pipe
Safely setup and operate Gas Tungsten Arc Welding Stainless Steel pipe (GTAW- Stainless Steel Pipe) equipment, proper assembly of a 6G - 45° fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 6G - 45° fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2250 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2260 GTAW Aluminum (GTAW-AL) 5G Pipe
An introduction to the principals of Gas Tungsten Arc Welding of Aluminum Pipe (GTAW- Aluminum Pipe) in the 5G horizontal fixed position, proper assembly of a 5G pipe joint, proper weld quality, protecting the root, safe setup of equipment and practice welding a 5G horizontal fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2230, WELD2220, WELD2221, WELD2222 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 2261 GTAW Aluminum (GTAW-AL) 2G Pipe
Safely setup and operate Gas Tungsten Arc Welding Aluminum pipe (GTAW-Aluminum Pipe) equipment, proper assembly of a 2G vertical fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 2G vertical fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2260 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Horus 120

WELD 2262 GTAW Aluminum (GTAW-AL) 6G Pipe
Safely setup and operate Gas Tungsten Arc Welding Aluminum pipe (GTAW-Aluminum Pipe) equipment, proper assembly of a 6G - 45° fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 6G - 45° fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2260 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2320 GMAW- Pipe 2G
An introduction to the principals of Gas Metal Arc Welding of Pipe (GMAW-Pipe) in the 2G vertical fixed position, proper assembly of a 2G pipe joint, proper weld quality, safe setup of equipment, and practice welding a 2G vertical fixed position pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 2321 GMAW- Pipe 5G
Safely setup and operate Gas Metal Arc Welding pipe (GMAW-Pipe) equipment, proper assembly of a 5G horizontal fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 5G horizontal fixed position pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2322 GMAW- Pipe 6G
Safely setup and operate Gas Metal Arc Welding Pipe (GMAW-Pipe) equipment, proper assembly of a 6G - 45° fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 6G - 45° fixed position pipe joint.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2330 GMAW-Aluminum Multi Joint
An introduction to the principals of Gas Metal Arc Welding Aluminum (GMAW-A), component and consumable identification including the safe setup of equipment and practice of welding beads, fillet welds, and groove welds in the flat, vertical, horizontal, and overhead position.
PREREQUISITES: Weld1110 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 2340 GMAW Aluminum (GMAW-AL) 5G Pipe
An introduction to the principals of Gas Metal Arc Welding of Aluminum Pipe (GMAW- Aluminum Pipe) in the 5G horizontal fixed position, proper assembly of a 5G pipe joint, proper weld quality, protecting the root, safe setup of equipment and practice welding a 5G horizontal fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2330, WELD2320, WELD2321, WELD2322 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 1 Lab Hours 3 Total Credits 4 Clock Hours 120

WELD 2341 GMAW Aluminum (GMAW-AL) 2G Pipe
Safely setup and operate Gas Metal Arc Welding Aluminum pipe (GMAW- Aluminum Pipe) equipment, proper assembly of a 2G vertical fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 2G vertical fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2340 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2342 GMAW Aluminum (GMAW-AL) 6G Pipe
Safely setup and operate Gas Metal Arc Welding Aluminum pipe (GMAW-Aluminum Pipe) equipment, proper assembly of a 6G - 45° fixed position pipe joint, proper weld quality, safe setup of equipment and practice welding a 6G - 45° fixed position pipe joint.
PREREQUISITES: Weld1110, WELD2340 or WELD2885 and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 1121 Advanced Blueprint Reading
Instruction in this course includes a review of basic blueprint reading and an introduction to advanced blueprint layout, concepts, nomenclature, mark-up, and sketching specifications. Advanced disciplines covered may include Architectural, Civil, Electronics, Manufacturing, and Marine, Piping, Structural, ISO (International Standards Organization) or other industry specific disciplines.
PREREQUISITES: WELD1110, WELD1120 plus meets minimum approved Math entrance score, and consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 2 Lab Hours 2 Total Credits 4 Clock Hours 120

WELD 2410 Automated Welding Processes
An introduction to automated welding processes including a review of fundamental automated welding process knowledge, welding procedures, joint design, equipment set-up and operation. Process applications may include but are not limited to SAW (Submerged Arc Welding), FCAW (Flux-Core Arc Welding), GMAW (Gas Metal Arc Welding), and GTAW (Gas Tungsten Arc Welding).
PREREQUISITES: WELD1110 and consent of the Instructor/Advisor. 

Lecture Hours 2 Lab Hours 1 Total Credits 3 Clock Hours 60

WELD 2420 Construction Procedures 1
This course is designed to introduce a student to skills in construction procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2421 Construction Procedures 2
This course is designed to introduce a student to advanced skills in construction procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2422 Construction Procedures 3
This course is designed to introduce a student to advanced skills in construction procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2423 Construction Procedures 4
This course is designed to introduce a student to advanced skills in construction procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2430 Maintenance Procedures 1
This course is designed to introduce a student to skills in maintenance procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2431 Maintenance Procedures 2
This course is designed to introduce a student to advanced skills in maintenance procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2432 Maintenance Procedures 3
This course is designed to introduce a student to advanced skills in maintenance procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus)

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2433 Maintenance Procedures 4
This course is designed to introduce a student to advanced skills in maintenance procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2440 Manufacturing Procedures 1
This course is designed to introduce a student to skills in manufacturing procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2441 Manufacturing Procedures 2
This course is designed to introduce a student to advanced skills in manufacturing procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2442 Manufacturing Procedures 3
This course is designed to introduce a student to advanced skills in manufacturing procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2443 Manufacturing Procedures 4
This course is designed to introduce a student to advanced skills in manufacturing procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2450 Marine Procedures 1
This course is designed to introduce a student to skills in marine procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2451 Marine Procedures 2
This course is designed to introduce a student to advanced skills in marine procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2452 Marine Procedures 3
This course is designed to introduce a student to advanced skills in marine procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2453 Marine Procedures 4
This course is designed to introduce a student to advanced skills in marine procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2460 Piping Procedures 1
This course is designed to introduce a student to skills in piping procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2461 Piping Procedures 2
This course is designed to introduce a student to advanced skills in piping procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2462 Piping Procedures 3
This course is designed to introduce a student to advanced skills in piping procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2463 Piping Procedures 4
This course is designed to introduce a student to advanced skills in piping procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2470 Pressure Vessel Procedures 1
This course is designed to introduce a student to skills in pressure vessel procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2471 Pressure Vessel Procedures 2
This course is designed to introduce a student to advanced skills in pressure vessel procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2472 Pressure Vessel Procedures 3
This course is designed to introduce a student to advanced skills in pressure vessel procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2473 Pressure Vessel Procedures 4
This course is designed to introduce a student to advanced skills in pressure vessel procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2480 Shipbuilding Procedures 1
This course is designed to introduce a student to skills in shipbuilding procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed. 
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2481 Shipbuilding Procedures 2
This course is designed to introduce a student to advanced skills in shipbuilding procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2482 Shipbuilding Procedures 3
This course is designed to introduce a student to advanced skills in shipbuilding procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed. 
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2483 Shipbuilding Procedures 4
This course is designed to introduce a student to advanced skills in shipbuilding procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2490 Structural Procedures 1
This course is designed to introduce a student to skills in structural procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2491 Structural Procedures 2
This course is designed to introduce a student to advanced skills in structural procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2492 Structural Procedures 3
This course is designed to introduce a student to advanced skills in structural procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2493 Structural Procedures 4
This course is designed to introduce a student to advanced skills in structural procedures, related performance skills, and/or industry specific knowledge and safety awareness. Skills will be administered through cooperation with industry partners as indicated by the competency descriptions listed.
PREREQUISITES: Students may be required to pass an assessment of prior skills (WELD2883 or WELD2885) and/or have achieved an acceptable exit level certificate prior to enrollment and have the consent of instructor. (To be completed by the Louisiana Technical College Campus) 

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 60

WELD 2883 Basic Skills Evaluation
A course designed to assess a student’s life skills in welding and welding related performance and/or knowledge. Specific skills tested will be determined by the instructor and may include any combination of competency indicated in the welding program core curriculum. This assessment will be used to determine a student’s readiness to enter the program at a more advanced skill level. 

Note: Documented industry based certifications obtained within the past “6” (six) months may be substituted for skills determination with the instructors consent. This course is “NOT” a substitute for taking or challenging a core and/or required electives course and “NO” credit will be given toward a credit course. 
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 1 Total Credits 1 Clock Hours 30

WELD 2885 Advanced Skills Evaluation
A course designed to assess a student’s life skills in advanced welding and welding related performance and/or knowledge. Specific skills tested will be determined by the instructor and may include any combination of competency indicated throughout the welding program. This assessment will be used to determine a student’s readiness to enter the program at a more advanced skill level.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 1 Total Credits 1 Clock Hours 30

WELD 2893 SMAW Certification Preparation
A review and practice of skills and procedures associated with advanced Shielded Metal Arc Welding (SMAW) to prepare for industry certification.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 90

WELD 2895 FCAW Certification Preparation
A review and practice of skills and procedures associated with advanced Shielded Metal Arc Welding (SMAW) to prepare for industry certification.
PREREQUISITES: Consent of the Instructor/Advisor. 

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 90

WELD 2897 GTAW Certification Preparation
A review and practice of skills and procedures associated with advanced Shielded Metal Arc Welding (SMAW) to prepare for industry certification.
PREREQUISITES: Consent of the Instructor/Advisor. 

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 90

WELD 2899 GMAW Certification Preparation
A review and practice of skills and procedures associated with advanced Shielded Metal Arc Welding (SMAW) to prepare for industry certification.
PREREQUISITES: Consent of the Instructor/Advisor. 

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 90

WELD 2996 Certification
A review of American Welding Society certification requirements, materials and mastered student skills, compare completed records; take an AWS closed book certification exam, and prepare workmanship qualification samples according to the AWS QC10- Entry Level Welder standard.
PREREQUISITES: Complete Program Core and the consent of the Instructor/Advisor. Exit Notice: Students may be required to pass course proficiency tests before proceeding to other program content.

Lecture Hours 2 Lab Hours 2 Total Credits 4 Clock Hours 120

WELD 2997 Practicum
A Practicum provides supervised on-the-job work experience related to the student's education objectives. Students participating in Practicum do not receive compensation.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 135

WELD 2999 Cooperative Education
Cooperative Education provides supervised on-the-job work experience related to the student's educational objectives.  Students participating in Cooperative Education receive compensation for their work.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Horus 135

WELD 2991 Special Projects 1
A course designed for the student who has demonstrated specific special needs.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 1 Total Credits 1 Clock Hours 30

WELD 2993 Special Projects 2
A course designed for the student who has demonstrated specific special needs.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 2 Total Credits 2 Clock Hours 60

WELD 2995 Special Projects 3
A course designed for the student who has demonstrated specific special needs.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 3 Total Credits 3 Clock Hours 90

WELD 2992 Special Projects 4
A course designed for the student who has demonstrated specific special needs.
PREREQUISITES: Consent of instructor

Lecture Hours 1 Lab Hours 1 Total Credits 2 Clock Hours 45

WELD 2994 Special Projects 5
A course designed for the student who has demonstrated specific special needs.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 4 Total Credits 4 Clock Hours 120

WELD 2990 Special Projects 6
A course designed for the student who has demonstrated specific special needs.
PREREQUISITES: Consent of instructor

Lecture Hours 0 Lab Hours 6 Total Credits 6 Clock Hours 180

CSRV 1000 Customer Service
This course is intended to help participants' progress from learning about themselves, to learning how to relate to their internal customers as well as their external customers in the workplace. 
PREREQUISITES: Consent of instructor

Lecture Hours 3 Lab Hours 0 Total Credits 3 Clock Hours 45

CSRV 2000 Customer Service
The assessment to earn sales certification measures and validates
knowledge in the following areas: prepares for selling, gains customer commitment and closes the sale,
develops and implements sales and follow-up plan. The interactive curriculum is built upon the national
sales standards. Upon completion of the course students will be eligible to schedule the NRF National
Professional Certification in Sales. Successful candidates prove their demonstration of knowledge and
skills important to successful employment in sales and service centers and will receive a certification
and a pin. These credentials are portable from state to state since this is a national certification. 
PREREQUISITES: Customer Service 1000

Lecture Hours 3 Lab Hours 0 Total Credit Hours 3 Clock Hours 45

ENTP 1000 Fundamentals Of Entrepreneurship
This course is an introduction to the entrepreneurial process and the skills needed to plan, organize, manage, operate and finance a small business.
PREREQUISITES: Consent of instructor

Lecture Hours 3 Lab Hours 0 Total Credit Hours 3 Clock Hours 45